基于彩色图像处理的浮选尾煤灰分软测量研究

浮选尾煤灰分是浮选产品的一个重要指标。针对选煤厂浮选尾煤灰分多采用离线检测而无法实现在线准确测量，以及当前浮选软测量多采用单一的灰度图像从而导致软测量模型精度及适应性较差的问题，提出了一种基于彩色图像处理的浮选尾煤软测量方法，建立了基于最小二乘支持向量机(LSSVM)的浮选尾煤灰分软测量模型。模型以不同颜色空间的彩色特征、灰度均值以及浓度特征为输入变量，以尾煤灰分作为输出变量，采用粒子群优化算法对LSSVM模型参数进行优化。结果表明：所建立的尾煤灰分软测量模型可以较好地实现浮选尾矿灰分的在线预测，引入浮选尾矿图像的彩色特征可以提高尾煤图像分析的精度，预测精度达96.89%。研究成果在柳湾选煤厂现场应用，并取得了较好的尾矿灰分测量效果。     

Mechanical,surface morphological and multi-objective optimization of tribological properties of V2O5 doped lead calcium titanate borosilicate glass ceramics

In the 55[(Pb_xCa_1−x).OTiO₂]-44[2SiO₂.B₂O₃]-1V₂O₅ system, various experimental studies were performed to obtain the mechanical and tribological properties of synthesized glass ceramics (GCs). The surface morphological study and elemental analysis were carried out using scanning electron microscope (SEM) followed by EDAX. The tribological measurements were also performed; based on Taguchi's L₂₅ orthogonal array, considering different GC compositions, sliding speeds and loads. The signal to noise (S/N) ratio was used to identify the influencing parameters on minimizing wear coefficient (k) and coefficient of friction (COF). To improve the tribological properties, the modeling of output responses was performed using response surface methodology (RSM) that was being used for multi-objective optimization using a Pareto optimality approach i.e. Genetic Algorithm (GA). The experimentally achieved k and COF were compared with the earlier work that carried out by the authors for germanium (Ge) doped GC samples. It is observed that the various mechanical properties (Vickers hardness, 29 GPa, Young's modulus, 1808 MPa, and compressive strength, 221 MPa) improved significantly in comparison to the Ge doped GC samples. The improved mechanical and tribological properties of the synthesized GC can be used as a coating material for the structural alloys and machine tool slides in view of its effective wear and corrosion resistance.     

Optimal filtering and control for wireless networked closed-loop control systems

This article studies the optimal filtering and control for wireless networked control systems (WNCSs). In WNCSs, packets may be lost in both control and feedback channels and user datagram protocol is usually used to improve the performance of the real-time control. Relevant literature indicates that the conventional optimal filtering for such a system cannot be applied in practice due to the complex calculation with Gaussian mixtures. This paper proposes a novel scheme to realize the optimal filtering and the linear quadratic Gaussian control for WNCSs, in which the controlled node performs a local estimation and the remote-control node performs the final estimation and control, and a synchronization of two estimators is guaranteed by a communication mechanism. An optimal filtering algorithm is developed, the stability condition of the filtering error covariance is obtained, optimal finite-horizon and infinite-horizon control are derived, and the stability of the closed-loop control system is proved. Numerical simulations show the validity and feasibility of the theoretical results.     

基于光谱分类模型的保险杠物证无损研究

采用中红外光谱结合化学计量学的方法对车用保险杠碎片进行鉴别，分别对52个车用保险杠碎片样本的全波段光谱数据、指纹区光谱数据和主成分分析降维后的光谱数据建立Fisher判别分析和K近邻算法2种分类模型，并对分类结果进行比较。结果表明，主成分分析提取特征变量后构建的分类模型，分类的准确率更高，对聚丙烯（PP）、PP/滑石粉、PP/滑石粉/碳酸钙（CaCO₃）3种类型的样本分类准确率达到92.3 %，对PP/滑石粉类型中的10种品牌样本分类准确率达到88.9 %，分类结果理想；在构建的2种分类模型中，Fisher判别分析模型的分类率远高于K近邻算法模型，分析认为K近邻算法模型受到样本不均衡的影响；中红外光谱结合化学计量学可以实现对车用保险杠碎片的准确区分，且满足快速、无损的检验要求。     

基于词法特征的恶意域名快速检测算法

针对互联网中恶意域名攻击事件频发，现有域名检测方法实时性不强的问题，提出一种基于词法特征的恶意域名快速检测算法。该算法根据恶意域名的特点，首先将所有待测域名按照长度进行正则化处理后赋予权值；然后利用聚类算法将待测域名划分成多个小组，并利用改进的堆排序算法按照组内权值总和计算各域名小组优先级，根据优先级降序依次计算各域名小组中每一域名与黑名单上域名之间的编辑距离；最后依据编辑距离值快速判定恶意域名。算法运行结果表明，基于词法特征的恶意域名快速检测算法与单一使用域名语义和单一使用域名词法的恶意域名检测算法相比，准确率分别提高1.7%与2.5%，检测速率分别提高13.9%与6.8%，具有更高的准确率和实时性。     

超级计算机网络引导技术研究与分析

针对超级计算机系统中网络引导时间开销大的问题，提出网络引导分布算法是影响网络引导性能的主要因素之一，是优化网络引导性能的主要方向的观点。首先，分析了影响大规模网络引导性能的主要因素；其次，结合一种典型超级计算机系统，分析了超节点循环分布算法（SCDA）和插件循环分布算法（BCDA）的网络引导数据流拓扑结构；最后，量化分析了这两种算法对各个网络路径段的压力和可获得的网络性能，发现BCDA性能是SCDA性能的1~20倍。通过理论分析和模型推导发现，在计算节点和引导服务器之间使用更细粒度的映射算法可以在引导部分资源时使用尽量多的引导服务器，减少对局部网络资源的过早竞争，提升网络引导性能。     

Shape from focus based on 3D structure tensor using optical microscopy

Shape from focus (SFF) is a widely used passive optical method for 3D shape reconstruction. In SFF, a focus measure, which is used to estimate the relative focus level, plays a critical role in depth estimation. In this article, we present a new focus measure for accurate 3D shape estimation in optical microscopy based on the analysis of 3D structure tensor. First, the 3D tensors are computed from the input image sequence for each pixel. Then, each tensor is decomposed into point, curve, and surface tensors by decomposing tensors into eigenvalues and eigenvectors. Finally, the surfaceness is used to measure the quality of sharpness. The proposed focus measure provides accurate focus values and better resistance against noise. The proposed measure is evaluated by conducting experiments using image sequences of simulated and microscopic real objects. The comparative analysis demonstrates the effectiveness of the proposed focus measure in recovering 3D shape.     

鲸鱼优化支持向量机的短期风电功率预测

为提高风电预测的精度,提出一种鲸鱼优化支持向量机SVM(support vector machine)的组合预测模型。该模型针对风电序列的非平稳波动特性,首先应用集合经验模态分解技术EEMD(ensemble empirical mode de?composition)将原始风电序列分解为一系列不同特征尺度的子序列;并引入鲸鱼优化算法WOA(whales optimiza?tion algorithm)解决SVM中学习参数选择难的问题,进而对各子序列建立WOA_SVM预测模型;最后,叠加各子序列的预测值以得到最终预测值。仿真表明,所提EEMD_WOA_SVM模型具有较高的风电预测精度,显著优于其他基本模型。     

气候环境实验室地面结冰云雾模拟控制系统设计

飞机结冰会引起飞机气动特性、动力系统性能改变,甚至造成飞行事故。地面结冰云雾模拟设施作为一种模拟飞机飞行结冰条件的重要设备,常用于飞机防除冰系统功能验证。针对气候环境实验室结冰云雾试验条件需要,在对地面结冰云雾模拟系统进行研究的基础上,对适用于气候环境实验室的结冰云雾模拟系统进行了设计。对系统关键设计技术、系统功能及组成进行了分析,并对控制系统方案进行了详细阐述。试验表明,控制系统人机界面友好,运行可靠,能够满足液态水含量、雾滴直径参数的精确调节,产生符合试验所需的结冰环境。     

Computation and investigation of mode characteristics in nonlinear system with tuned/mistuned contact interface

This study derived a novel computation algorithm for a mechanical system with multiple friction contact interfaces that is well-suited to the investigation of nonlinear mode characteristic of a coupling system. The procedure uses the incremental harmonic balance method to obtain the nonlinear parameters of the contact interface. Thereafter, the computed nonlinear parameters are applied to rebuild the matrices of the coupling system, which can be easily solved to calculate the nonlinear mode characteristics by standard iterative solvers. Lastly, the derived method is applied to a cycle symmetry system, which represents a shaft–disk–blade system subjected to dry friction. Moreover, this study analyzed the effects of the tuned and mistuned contact features on the nonlinear mode characteristics. Numerical results prove that the proposed method is particularly suitable for the study of nonlinear characteristics in such nonlinear systems.